Straight
Straight tools are available in sizes from 10 — 130Nm. A throttle lever & reverse switch are provided standard. Optional sliding spindles, offset gearing and tube nut heads are available. Tools may be hung or mounted by using a clamp collar (optimal location is on one of the locking nuts behind the output drive).
(To download, "right click" the item you want to download and select "Save target as")
New style tools (Suffix "-20x")
|
Part Number |
Max. Torque (Nm / ft-lbs) |
Max. RPM | Total Length (mm / in) |
Weight (kg / lbs) |
Sq. Drive (in) |
2-D PDF | 3-D STEP file no cable | 3-D STEP file with cable |
AutoCAD DWG |
| HFT-010M50-S1-20 | 10 / 7.4 | 1800 | 331 / 13.0 | 1.3 / 2.8 | 3/8 |
 |
 |
|
 |
| HFT-015M80-S1-20 | 15 / 11.1 | 1600 | 351 / 13.8 | 1.4 / 3.1 | 3/8 |
|
|
|
|
| HFT-025M80-S1-20 | 25 / 18.4 | 1000 | 351 / 13.8 | 1.4 / 3.1 | 3/8 |
|
|
|
|
| HFT-040M80-S-20 | 40 / 29.5 | 694 | 351 / 13.8 | 1.4 / 3.1 | 3/8 |
|
|
|
|
| HFT-055M120-S-20 | 55 / 40.6 | 861 | 404.5 / 15.9 | 2.4 / 5.3 | 1/2 |
|
|
|
|
| HFT-090M120-S-20 | 90 / 66.0 | 488 | 417.5 / 16.4 | 2.7 / 5.9 | 1/2 |
|
|
|
|
| HFT-130M120-S-20 | 130 / 96.0 | 318 | 417.5 / 16.4 | 2.7 / 5.9 | 1/2 |
|
|
|
|
FEC drawings listed above are for reference only. Although FEC attempts to make these as accurate as possible, slight variations may exist with the actual tools.
Previous style tools (Suffix "-10x")
|
Part Number |
Max. Torque (Nm / ft-lbs) |
Max. RPM | Total Length (mm / in) |
Weight (kg / lbs) |
Sq. Drive (in) |
2-D PDF | 3-D STEP file no cable | 3-D STEP file with cable |
AutoCAD DWG |
| HFT-010M50-S1-10 | 10 / 7.4 | 1800 | 332.5 / 13.1 | 1.3 / 2.8 | 3/8 |
|
|
|
|
| HFT-015M80-S1-10 | 15 / 11.1 | 1600 | 352.5 / 13.9 | 1.4 / 3.2 | 3/8 |
|
|
|
|
| HFT-025M80-S1-10 | 25 / 18.4 | 1000 | 352.5 / 13.9 | 1.4 / 3.2 | 3/8 |
|
|
|
|
| HFT-040M80-S-10 | 40 / 29.5 | 690 | 415.5 / 16.4 | 1.4 / 3.2 | 3/8 |
|
|
|
|
| HFT-055M80-S-10 | 55 / 40.6 | 508 | 393 / 15.5 | 3.0 / 6.6 | 1/2 |
|
|
|
|
| HFT-080M80-S-10 | 80 / 59.0 | 303 | 393 / 15.5 | 3.0 / 6.6 | 1/2 |
|
|
|
|
FEC drawings listed above are for reference only. Although FEC attempts to make these as accurate as possible, slight variations may exist with the actual tools.
Previous style tools (Suffix "-02A", "-03A")
|
Part Number |
Max. Torque (Nm / ft-lbs) |
Max. RPM | Total Length (mm / in) |
Weight (kg / lbs) |
Sq. Drive (in) |
2-D PDF | 3-D STEP file no cable | 3-D STEP file with cable | 3-D STEP file 90 degree cable |
AutoCAD DWG |
| HFT-010M50-S1-02A | 10 / 7.4 | 1800 | 327 / 12.9 | 1.3 / 2.8 | 3/8 |
|
|
|
|
|
| HFT-015M80-S1-02A | 15 / 11.1 | 1600 | 347 / 13.7 | 1.4 / 3.2 | 3/8 |
|
|
|
|
|
| HFT-025M80-S1-02A | 25 / 18.4 | 1000 | 347 / 13.7 | 1.4 / 3.2 | 3/8 |
|
|
|
|
|
| HFT-040M80-S-02A | 40 / 29.5 | 694 | 347 / 13.7 | 1.4 / 3.2 | 3/8 |
|
|
|
|
|
| HFT-055M80-S-03A | 55 / 40.6 | 508 | 387.5 / 15.3 | 3.0 / 6.6 | 1/2 |
|
|
|
|
|
| HFT-080M80-S-03A | 80 / 59.0 | 315 | 410.4 / 16.2 | 2.8 / 6.2 | 1/2 |
|
|
|
|
|
Contact FEC regarding other tools not listed above.
FEC drawings listed above are for reference only. Although FEC attempts to make these as accurate as possible, slight variations may exist with the actual tools.