enFORCE Servo Press Tool Specifications & Drawings

Call Us: 586-580-2622

enFORCE Servo Press

Slim Line Series

The Slim Line Servo Press Series is designed for close center-to-center pressing applications where presses must be mounted next to each other or a smaller footprint is required.  30-40% smaller and up to 70% lighter than the DPT series, the Slimline series features belt drive for quiet operation and simple connection to the servo controller.  Maintenance brakes come standard on the Slimline series.

Standard stroke for both Fitting and Bonding presses is 200mm. 100mm and 300mm strokes available upon request.

(To download, "right click" the item you want to download and select "Save target as")

FITTING TYPE (Holding time generally < 1sec)

Part Number

Max. Load
(kN / Tonne)
Continuous Load
(kN / Tonne)
Max. Speed
(mm / sec)
Length
(mm / in)
Width
(mm / in)
Height
(mm / in)
Weight
(kg / lbs)
3-D STEP file & 2-D PDF* AutoCAD DWGs
DPS-051R3-20FB 5.0 / 0.51 1.8 / 0.18 333 556 / 21.9 68 / 2.7 209 / 8.2 16.4 / 36.2
DPS-101R3-20FB 10.0 / 1.02 2.7 / 0.27 222 556 / 21.9 68 / 2.7 209 / 8.2 16.4 / 36.2
DPS-301R4H-20FB 30.0 / 3.06 12. / 1.22 200 640 / 25.2 90 / 3.5 262 / 10.3 36.5 / 80.5
DPS-501R4H-20FB 50.0 / 5.10 13.5 / 1.37 160 732 / 28.8 115 / 4.5 322 / 12.7 62 / 136.7
DPS-501R5-20FB1 50.0 / 5.10 22.0 / 2.24 200 732 / 28.8 130 / 5.1 322 / 12.7 73 / 160.9
DPS-801R4H-20FB 80.0 / 8.16 18.0 / 1.83 120 855 / 33.7 135 / 5.3 375 / 14.8 98 / 216.1
DPS-102R5-20FB 100.0 / 10.20 32.0 / 3.26 133 855 / 33.7 135 / 5.3 375 / 14.8 110 / 242.5

1) Special High Power model for extended holding.

FEC drawings listed above are for reference only.  Although FEC attempts to make these as accurate as possible, slight variations may exist with the actual tools.

BONDING TYPE  (Holding time > 1sec - can hold indefinitely)

Part Number

Max. Load
(kN / Tonne)
Continuous Load
(kN / Tonne)
Max. Speed
(mm / sec)
Length
(mm / in)
Width
(mm / in)
Height
(mm / in)
Weight
(kg / lbs)
3-D STEP file & 2-D PDF* AutoCAD DWGs
DPS-051R3-20PB 5.0 / 0.51 5.0 / 0.51 88 556 / 21.9 68 / 2.7 209 / 8.2 17 / 37.5
DPS-101R4H-20PB 10.0 / 1.02 10.0 / 1.02 160 556 / 21.9 68 / 2.7 209 / 8.2 21 / 46.3
DPS-301R4H-20PB 30.0 / 3.06 30.0 / 3.06 53 640 / 25.2 90 / 3.5 262 / 10.3 38 / 83.8
DPS-501R5-20PB 50.0 / 5.10 50.0 / 5.10 53 732 / 28.8 130 / 5.1 322 / 12.7 79 / 174.2
DPS-801R5-20PB 80.0 / 8.16 80.0 / 8.16 40 855 / 33.7 135 / 5.3 375 / 14.8 116 / 255.7
DPS-102R5-20PB 100.0 / 10.20 100.0 / 10.20 32 855 / 33.7 135 / 5.3 375 / 14.8 116 / 255.7

* Contact FEC for special tool requests not seen on this sheet.

FEC drawings listed above are for reference only.  Although FEC attempts to make these as accurate as possible, slight variations may exist with the actual tools.