Call Us: 586-580-2622

enFORCE Servo Press

DPT Series

FITTING

Fitting servo presses are required for applications with a holding time of 1 second or less.

(To download, "right click" the item you want to download and select "Save target as")

Part Number

Max. Load
(kN / Tonne)
Continuous Load
(kN / Tonne)
Max. Speed
(mm / sec)
Length
(mm / in)
Width
(mm / in)
Height
(mm / in)
Weight
(kg / lbs)
3-D STEP file & 2-D PDF* AutoCAD DWGs
DPT-021R1-15FS(B) 1.96 / 0.2 0.42 / 0.04 416.6 432 / 17.0 60 / 2.4 126 / 5.0 10 / 22.0
DPT-051R2-25FS(B) 4.90 / 0.5 0.8 / 0.08 333.3 665 / 26.2 85 / 3.3 188 / 7.4 30 / 66.1
DPT-101R3-25FS(B) 9.81 / 1.0 2.1 / 0.21 277.7 690 / 27.2 110 / 4.3 240 / 9.4 55 / 121.3
DPT-151R3-25FS(B) 14.71 / 1.5 2.1 / 0.21 277.7 690 / 27.2 110 / 4.3 240 / 9.4 55 / 121.3
DPT-201R3-25FS(B) 19.61 / 2.0 3.5 / 0.35 166.6 690 / 27.2 110 / 4.3 247 / 9.7 55 / 121.3
DPT-301R4H-25FS(B) 29.42 / 3.0 6.4 / 0.64 320.0 744 / 29.3 128 / 5.0 255 / 10.0 60 / 132.3
DPT-501R4H-25FS(B) 49.03 / 5.0 10.2 / 1.02 200.0 885 / 34.8 155 / 6.0 334 / 13.1 100 / 220.5
DPT-701R4H-25FS(B) 68.65 / 7.0 15.3 / 1.53 133.3 885 / 34.8 155 / 6.1 334 / 13.0 100 / 220.5
DPT-102R5-25FG(B) 98.1 / 10.0 32.0 / 3.26 116.6 927 / 36.5 330 / 13.0 432 / 17.0 290 / 639.3
DPT-152R5-25FG(B) 147.1 / 15.0 48.0 / 4.89 77.77 1007 / 39.6 380 / 15.0 500 / 19.7 400 / 881.8
DPT-202R5-25FG(B) 196.1 / 20.0 64.0 / 4.89 66.67 1116 / 43.9 450 / 17.7 626 / 24.6 600 / 1322.8

FEC drawings listed above are for reference only.  Although FEC attempts to make these as accurate as possible, slight variations may exist with the actual tools.

BONDING

Bonding servo presses are for applications that are required to hold the load applied for more than 1 second.

Part Number

Max. Load
(kN / Tonne)
Continuous Load
(kN / Tonne)
Max. Speed
(mm / sec)
Length
(mm / in)
Width
(mm / in)
Height
(mm / in)
Weight
(kg / lbs)
3-D STEP file
& 2-D PDF*
AutoCAD DWGs
DPT-021R3-15PS(B) 1.96 / 0.2 1.96 / 0.2 208.3 445 / 17.5 63 / 2.5 148 / 5.8 14 / 30.9
DPT-051R3-25PS(B)  4.90 / 0.5 4.90 / 0.5 95.24 663 / 26.1 85 / 3.3 227 / 8.9 33 / 72.8
DPT-101R4H-25PS(B) 9.81 / 1.0 9.81 / 1.0 133.3 690 / 27.2 110 / 4.3 240 / 9.4 54 / 119.0
DPT-151R4H-25PS(B)  14.71 / 1.5 14.71 / 1.5 114.2 690 / 27.2 110 / 4.3 240 / 9.4 54 / 119.0
DPT-201R4H-25PS(B)  19.61 / 2.0 19.61 / 2.0 80.00 690 /27.2 110 / 4.3 247 / 9.7 54 / 119.0
DPT-301R4H-25PS(B) 29.42 / 3.0 29.42 / 3.0 64.00 773 / 30.4 128 / 5.0 304 / 12.0 64 / 141.1
DPT-501R5B-25PS(B) 49.03 / 5.0 49.03 / 5.0 58.33 885 / 34.8 155 / 6.1 371 / 14.6 115 / 253.5
DPT-701R5-25PS(B) 68.65 / 7.0 68.65 / 7.0 47.61 895 / 35.2 190 / 7.5 415 / 16.3 130 / 286.6
DPT-102R5B-25PG(B) 98.1 / 10.0 98.1 / 10.0 29.16 926 / 36.5 330 / 13.0 505 / 19.9 290 / 639.3
DPT-152R5B-25PG(B) 147.1 / 15.0 147.1 / 15.0 22.22 962 / 37.9 380 / 15.0 500 / 19.7 400 / 881.8
DPT-202R5-25PG(B)  196.1 / 20.0 196.1 / 20.0 16.37 1055 / 41.5 450 / 17.7 520 / 20.5 680 / 1499.1

FEC drawings listed above are for reference only.  Although FEC attempts to make these as accurate as possible, slight variations may exist with the actual tools.

* The downloadable file contains both a 3-D STEP file as well as a 2-D PDF drawing for each model in a compressed (.ZIP) format.

(B) - Optional maintenance brake.

Contact FEC for special tool requests not seen on this sheet.  Stroke lengths are available for most press sizes from 50mm up to 500mm.